S wave cooling tower fills

cooling tower s wave cooling tower fills

S wave cooling tower fills has trapezoidal "s" wave design, which increases the closure number of water film, and makes the water film redistribute repeatedly as well as tending to be more uniform. It extends the time for heat and mass transfer and improves the cooling effect. Several pieces of fills are connected with each other, forming honeycomb passages, which prevents contaminants from blocking. It is widely used for counter-flow cooling tower in industrial area and cement cooling tower with hyperbolic curve in power plant.

There is one piece and one mass of assembled s wave fills, they are all blue.
This kind of s wave cooling tower fills has blue colour and the trapezoidal "s" wave design has better cooling effect.There is one mass of s wave cooling tower fills in white on the ground, and you can see the side face of it.
Several pieces of white s wave fills are connected into honeycomb configuration on the side face.
There are two pieces of s wave cooling tower fills, and they have different thickness.
We offer different thickness of s wave cooling tower fills for various applications.There is one piece of light blue s wave fill on the ground.
Light blue s wave fill is also favorable for some cooling towers.
There is one piece of transparent s wave cooling tower fill on the ground.
Transparent s wave cooling tower fill is also commonly used for its aging resistance and good waterproof.
Feature

High temperature and aging resistance.
Rough surface for good hydrophilicity.
Easy installation and long using life.
Specification

Material: PVC, PP.
Length: 800-1400 mm.
Width: 500 mm.
Single piece thickness: 0.35-0.60 mm.
Height after assembly: 0.6 m to 3.0 m (or as request).
Oxygen index: ? 30.
Application
It is mainly used for industrial counter flow cooling towers and hyperbolic cement cooling tower in power plant.